OVH Community, your new community space.

hard disk danneggiato ks387007.kimsufi.com


fulvio
15.01.2014, 23.00
prova anche un long test:
smartctl -t long /dev/sda

Citazione Originariamente Scritto da saverio1974
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA
# 1 Short offline Completed without error 00% 107 -
# 2 Short offline Completed without error 00% 106 -
# 3 Short offline Completed without error 00% 105 -
# 4 Short offline Completed without error 00% 105 -
# 5 Short offline Completed without error 00% 0 -

azrael666x
15.01.2014, 13.19
Dai log che hai fornito, non vengono identificati errori di sorta.
In genere, devi verificare queste stringhe:
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
Se sono a 0 come nel tuo caso, non hai problemi sui dischi.

Inoltre, hai anche questa conferma:
SMART Error Log Version: 1
No Errors Logged

EvolutionCrazy
15.01.2014, 11.23
http://www.techrepublic.com/blog/ope...rd-drives/1389

saverio1974
14.01.2014, 23.12
altrimenti ditemi voi che test devo fare che le faccio e vi do i risultati

saverio1974
14.01.2014, 23.10
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model: ST31000524AS
Serial Number: 9VPDMEFF
Firmware Version: JC4B
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Jan 15 00:06:01 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 168) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 36109116
3 Spin_Up_Time 0x0003 100 100 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 33
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 8872004894
9 Power_On_Hours 0x0032 078 078 000 Old_age Always - 20121
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 33
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 097 000 Old_age Always - 180391444523
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 061 045 045 Old_age Always In_the_past 39 (Lifetime Min/Max 39/39)
194 Temperature_Celsius 0x0022 039 055 000 Old_age Always - 39 (0 18 0 0)
195 Hardware_ECC_Recovered 0x001a 045 019 000 Old_age Always - 36109116
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 18227841224435
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2474700772
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1956902589

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA
# 1 Short offline Completed without error 00% 107 -
# 2 Short offline Completed without error 00% 106 -
# 3 Short offline Completed without error 00% 105 -
# 4 Short offline Completed without error 00% 105 -
# 5 Short offline Completed without error 00% 0 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Kaos
14.01.2014, 21.29
Che prove hai fatto per constatare che è danneggiato? Non hai log a riguardo?

saverio1974
14.01.2014, 20.12
adesso sembra sia tornato a funzionare correttamente

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00051dea

Device Boot Start End Blocks Id System
/dev/sda1 * 4096 40962047 20478976 83 Linux
/dev/sda2 40962048 1952471039 955754496 83 Linux
/dev/sda3 1952471040 1953517567 523264 82 Linux swap / Solaris

se comunque ci date un'occhiata ve ne sarei grato.

azrael666x
14.01.2014, 11.32
Il supporto per i kimsufi, anche la richiesta di incidenti, è solo tramite forum. Per questo motivo NON puoi neanche aprire un ticket incidente dal manager.
Nel tuo caso, devi incollare i risultati dei test che indicano l'errore.
Provvederemo noi ad aprire un apposito ticket incidente per la sostituzione.
Attendo tue informazioni, ti farò rispondere anche dal supporto.

saverio1974
13.01.2014, 18.43
salve, dopo varie prove e testo ho riscontrato che hard disk è danneggiato.
vi ho scritto anche dal supporto del manager senza alcuna vostra risposta.
spero interveniate in breve tempo nella sostituzione dello stesso, ho già effettuato il bekup quimndi potete provedere nella sostituzione del disco.
P.S: è già da più di 10 giorni che ho questo problema.
grazie