OVH Community, your new community space.

Kimsufi non vede hd supplementare


Sofficina
03.04.2014, 17.49
Mi č stato scritto questo nel manager:
Se scrive nella sezione incidenti del forum riguardante gli incidenti del Kimsufi, i nostri colleghi che gestiscono il supporto riguardante quei server, verificato il problema, potranno aiutarla aprendo un ticket.
> > > > > >
> > > > > > Da qui non ci č possibile perchč il supporto Kimsufi non č pių residente in questa sede italiana
---------
Dal manager non č possibile gestire, qui nessuno mi risponde.......
torno al manager?
Qualcuno sarebbe cosė gentile da illuminarmi.
Grazie

Sofficina
31.03.2014, 19.46
root@rescue:~# smartctl -a -d ata /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.10.23-xxxx-std-ipv6-32-rescue] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3250410AS
Serial Number: 6RY7AFDV
Firmware Version: 3.AAF
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Mar 29 14:50:02 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 64) minutes.
SCT capabilities: (0x0001) SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 48
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 184299668
9 Power_On_Hours 0x0032 043 043 000 Old_age Always - 50403
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 48
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 059 030 045 Old_age Always In_the_past 41 ( 0 130 70 23 )
194 Temperature_Celsius 0x0022 041 070 000 Old_age Always - 41 (0 23 0 0)
195 Hardware_ECC_Recovered 0x001a 078 055 000 Old_age Always - 65310885
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@rescue:~# smartctl -a -d ata /dev/sdb
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.10.23-xxxx-std-ipv6-32-rescue] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

Smartctl open device: /dev/sdb failed: No such device

root@rescue:~# fdisk -l

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003b512

Device Boot Start End Blocks Id System
/dev/sda1 63 2047 992+ 42 SFS
/dev/sda2 * 2048 488376319 244187136 42 SFS
/dev/sda3 488376320 488395119 9400 42 SFS

sofia
31.03.2014, 17.42
errore

Sofficina
29.03.2014, 11.00
Buongiorno,
a seguito di un update e di un riavvio il server windows non vede pių l'hd supplementare.
In gestione dispositivi viene visto come altro dispositivo con il classico ! dei dispositivi sconosciuti.
E' un hd da 500 gb usb
Qualcuno ha idee in proposito?
Grazie